#include <16F883.h>
#device adc=10

#FUSES NOWDT                    //No Watch Dog Timer
#FUSES INTRC                    //Internal RC Osc
#FUSES NOPUT                    //No Power Up Timer
#FUSES MCLR                     //Master Clear pin enabled
#FUSES NOPROTECT                //Code not protected from reading
#FUSES NOCPD                    //No EE protection
#FUSES NOBROWNOUT               //No brownout reset
#FUSES NOIESO                   //Internal External Switch Over mode disabled
#FUSES NOFCMEN                  //Fail-safe clock monitor disabled
#FUSES NOLVP                    //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O
#FUSES NODEBUG                  //No Debug mode for ICD
#FUSES BORV40                   //Brownout reset at 4.0V
#FUSES NOWRT                    //Program memory not write protected

#use delay(clock=20000000)

#int_RTCC
void RTCC_isr()
{

}

#int_EXT
void EXT_isr()
{

}

#int_AD
void AD_isr()
{

}



void main()
{
int retardo=100;
   setup_adc_ports(sAN0|VSS_VDD);
   setup_adc(ADC_CLOCK_INTERNAL);
   setup_spi(FALSE);
   setup_timer_0(RTCC_INTERNAL|RTCC_DIV_2);
   setup_timer_1(T1_DISABLED);
   setup_timer_2(T2_DISABLED,0,1);
   setup_comparator(FALSE);
   setup_vref(FALSE);
   enable_interrupts(INT_RTCC);
   enable_interrupts(INT_EXT);
   enable_interrupts(INT_AD);
   enable_interrupts(GLOBAL);
   setup_oscillator(False);

   // TODO: USER CODE!!
    do{
       output_b(0b01010000);
       delay_ms(retardo);
       output_b(0b01100000);
       delay_ms(retardo);
       output_b(0b10100000);
       delay_ms(retardo);
       output_b(0b10010000);
       delay_ms(retardo);

    }while(true);
}