/****************************************************************************** MRF24WB0M Driver Customization Module for Microchip TCP/IP Stack -Provides access to MRF24WB0M WiFi controller -Reference: MRF24WB0M Data sheet, IEEE 802.11 Standard ******************************************************************************* FileName: WF_Config.h Dependencies: TCP/IP Stack header files Processor: PIC18, PIC24F, PIC24H, dsPIC30F, dsPIC33F, PIC32 Compiler: Microchip C32 v1.10b or higher Microchip C30 v3.22 or higher Microchip C18 v3.34 or higher Company: Microchip Technology, Inc. Software License Agreement Copyright (C) 2002-2010 Microchip Technology Inc. All rights reserved. Microchip licenses to you the right to use, modify, copy, and distribute: (i) the Software when embedded on a Microchip microcontroller or digital signal controller product ("Device") which is integrated into Licensee's product; or (ii) ONLY the Software driver source files ENC28J60.c, ENC28J60.h, ENCX24J600.c and ENCX24J600.h ported to a non-Microchip device used in conjunction with a Microchip ethernet controller for the sole purpose of interfacing with the ethernet controller. You should refer to the license agreement accompanying this Software for additional information regarding your rights and obligations. THE SOFTWARE AND DOCUMENTATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL MICROCHIP BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT OF SUBSTITUTE GOODS, TECHNOLOGY OR SERVICES, ANY CLAIMS BY THIRD PARTIES (INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), ANY CLAIMS FOR INDEMNITY OR CONTRIBUTION, OR OTHER SIMILAR COSTS, WHETHER ASSERTED ON THE BASIS OF CONTRACT, TORT (INCLUDING NEGLIGENCE), BREACH OF WARRANTY, OR OTHERWISE. Author Date Comment ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ KH 27 Jan 2010 Created for MRF24WB0M ******************************************************************************/ #ifndef __WF_CONFIG_H_ #define __WF_CONFIG_H_ /* ********************************************************************************************************* * DEFINES ********************************************************************************************************* */ /*----------------------------------------------------------------------------*/ /* This block of defines allows for code and data reduction by removing */ /* WiFi driver code and or data that is not needed by the application. */ /* Comment out those function blocks that are not needed. */ /*----------------------------------------------------------------------------*/ #define WF_USE_SCAN_FUNCTIONS #define WF_USE_TX_POWER_CONTROL_FUNCTIONS #define WF_USE_POWER_SAVE_FUNCTIONS #define WF_USE_MULTICAST_FUNCTIONS #define WF_USE_INDIVIDUAL_SET_GETS #define WF_USE_GROUP_SET_GETS //#define WF_USE_DATA_TX_RX_FUNCTIONS //#define USE_GRATUITOUS_ARP /*= WF_ASSERT MACRO ==================================================================*/ /* Customize how the WiFi driver assert macro (WF_ASSERT) should operate. */ /* To DISABLE the WF_ASSERT macro: Comment out '#define WF_DEBUG' */ /* To ENABLE the WF_ASSERT macro: Unomment out '#define WF_DEBUG' */ /*====================================================================================*/ #define WF_DEBUG /*= WF_CONSOLE =======================================================================*/ /* Customize whether the WiFi Driver supports a serial console application */ /* To DISABLE the serial console application: Comment out '#define WF_CONSOLE' */ /* To ENABLE the serial console application: Uncomment out '#define WF_CONSOLE' */ /*====================================================================================*/ //#define WF_CONSOLE /* needed for console demo */ //#define WF_CONSOLE_IFCFGUTIL /* needed for console demo */ /*--------------------------------------------*/ /* Default settings for Connection Management */ /*--------------------------------------------*/ #define MY_DEFAULT_SSID_NAME "WebSTAR" #define MY_DEFAULT_NETWORK_TYPE WF_ADHOC /* WF_INFRASTRUCTURE or WF_ADHOC */ #define MY_DEFAULT_SCAN_TYPE WF_ACTIVE_SCAN /* WF_ACTIVE_SCAN or WF_PASSIVE_SCAN */ #define MY_DEFAULT_CHANNEL_LIST {1,2,3,4,5,6,7,8,9,10,11} /* Desired channel list for FCC, use less channels to minimize scan time */ #define MY_DEFAULT_LIST_RETRY_COUNT_ADHOC (3) /* Number of times to try to connect to the SSID when using Ad/Hoc network type */ #define MY_DEFAULT_LIST_RETRY_COUNT_INFRASTRUCTURE (WF_RETRY_FOREVER) /* Number of times to try to connect to the SSID when using Infrastructure network type */ #define MY_DEFAULT_EVENT_NOTIFICATION_LIST (WF_NOTIFY_CONNECTION_ATTEMPT_SUCCESSFUL | \ WF_NOTIFY_CONNECTION_ATTEMPT_FAILED | \ WF_NOTIFY_CONNECTION_TEMPORARILY_LOST | \ WF_NOTIFY_CONNECTION_PERMANENTLY_LOST | \ WF_NOTIFY_CONNECTION_REESTABLISHED) #define MY_DEFAULT_PS_POLL WF_DISABLED /* WF_DISABLED or WF_ENABLED */ /* #define WF_AGGRESSIVE_PS */ /* WARNING !!! : This only can work with 1209 module FW version or later. * If you use the earlier version such as 1207 or 1205, then you should not define this. * Defining this will lead ASSERT problem with old module FW. */ #define MY_DEFAULT_WIFI_SECURITY_MODE WF_SECURITY_OPEN #define MY_DEFAULT_WIFI_SECURITY_WEP_KEYTYPE WF_SECURITY_WEP_OPENKEY /* WF_SECURITY_WEP_OPENKEY (default) or */ /* WF_SECURITY_WEP_SHAREDKEY. */ //#define USE_MRF24W_HOST_BUFFER //#define STACK_USE_EZ_CONFIG //#define EZ_CONFIG_SCAN //#define EZ_CONFIG_STALL //#define EZ_CONFIG_STORE /*****************************************************************************/ /*****************************************************************************/ /* WIFI SECURITY COMPILE-TIME DEFAULTS */ /*****************************************************************************/ /*****************************************************************************/ // Security modes available on WiFi network: // WF_SECURITY_OPEN : No security // WF_SECURITY_WEP_40 : WEP Encryption using 40 bit keys // WF_SECURITY_WEP_104 : WEP Encryption using 104 bit keys // WF_SECURITY_WPA_WITH_KEY : WPA-PSK Personal where binary key is given to MRF24WB0M // WF_SECURITY_WPA_WITH_PASS_PHRASE : WPA-PSK Personal where passphrase is given to MRF24WB0M and it calculates the binary key // WF_SECURITY_WPA2_WITH_KEY : WPA2-PSK Personal where binary key is given to MRF24WB0M // WF_SECURITY_WPA2_WITH_PASS_PHRASE : WPA2-PSK Personal where passphrase is given to MRF24WB0M and it calculates the binary key // WF_SECURITY_WPA_AUTO_WITH_KEY : WPA-PSK Personal or WPA2-PSK Personal where binary key is given and MRF24WB0M will // connect at highest level AP supports (WPA or WPA2) // WF_SECURITY_WPA_AUTO_WITH_PASS_PHRASE : WPA-PSK Personal or WPA2-PSK Personal where passphrase is given to MRF24WB0M and it // calculates the binary key and connects at highest level AP supports (WPA or WPA2) // Default pass phrase used for WF_SECURITY_WPA_WITH_PASS_PHRASE and // WF_SECURITY_WPA2_WITH_PASS_PHRASE security modes #define MY_DEFAULT_PSK_PHRASE "Microchip 802.11 Secret PSK Password" // If using security mode of WF_SECURITY_WPA_WITH_KEY or WF_SECURITY_WPA2_WITH_KEY, then this section // must be set to match the key for MY_DEFAULT_SSID_NAME and MY_DEFAULT_PSK_PHRASE // combination. The values below are derived from the SSID "MicrochipDemoAP" and the pass phrase // "Microchip 802.11 Secret PSK Password". // The tool at http://www.wireshark.org/tools/wpa-psk.html can be used to generate this field. #define MY_DEFAULT_PSK "\ \x86\xC5\x1D\x71\xD9\x1A\xAA\x49\ \x40\xC8\x88\xC6\xE9\x7A\x4A\xD5\ \xE5\x6D\xDA\x44\x8E\xFB\x9C\x0A\ \xE1\x47\x81\x52\x31\x1C\x13\x7C" //----------------------------------------------------------------------------------- // Default WEP keys used in WF_SECURITY_WEP_40 and WF_SECURITY_WEP_104 security mode //----------------------------------------------------------------------------------- #define MY_DEFAULT_WEP_PHRASE "WEP Phrase" // string 4 40-bit WEP keys -- corresponding to passphraseof "WEP Phrase" #define MY_DEFAULT_WEP_KEYS_40 "\ \x5a\xfb\x6c\x8e\x77\ \xc1\x04\x49\xfd\x4e\ \x43\x18\x2b\x33\x88\ \xb0\x73\x69\xf4\x78" // string containing 4 104-bit WEP keys -- corresponding to passphraseof "WEP Phrase" #define MY_DEFAULT_WEP_KEYS_104 "\ \x90\xe9\x67\x80\xc7\x39\x40\x9d\xa5\x00\x34\xfc\xaa\ \x77\x4a\x69\x45\xa4\x3d\x66\x63\xfe\x5b\x1d\xb9\xfd\ \x82\x29\x87\x4c\x9b\xdc\x6d\xdf\x87\xd1\xcf\x17\x41\ \xcc\xd7\x62\xde\x92\xad\xba\x3b\x62\x2f\x7f\xbe\xfb" /* Valid Key Index: 0, 1, 2, 3 */ #define MY_DEFAULT_WEP_KEY_INDEX (0u) #endif /* __WF_CONFIG_H_ */ #define MY_DEFAULT_LIST_RETRY_COUNT (WF_RETRY_FOREVER)