#include <18f4550.h>
//#fuses HS,MCLR,NOWDT,NOPROTECT,NOPUT,NOBROWNOUT,NOPBADEN,NOLVP,NOCPD,NODEBUG,NOWRT,NOVREGEN
#fuses HSPLL,NOWDT,NOPROTECT,NOLVP,NODEBUG,USBDIV,PLL5,CPUDIV1,VREGEN
#use delay(clock=20000000)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7)

#define USE_INTERRUPTS 1

char dato;

// INTERRUPCION por RECEPCION SERIE -------------------------------------------

#int_rda
void serial_isr() {

     if(kbhit()){
     dato=getc();
     printf("Dato Recibido %S\r\n",dato);
   }
}
void main() {

   disable_interrupts(global);
   disable_interrupts(int_timer1);
   disable_interrupts(int_rda);
   disable_interrupts(int_ext);
   disable_interrupts(int_ext1);
   disable_interrupts(int_ext2);
   setup_adc_ports(NO_ANALOGS);
   setup_adc(ADC_OFF);
   setup_spi(FALSE);
   setup_psp(PSP_DISABLED);
   setup_counters(RTCC_INTERNAL,RTCC_DIV_2);
   setup_timer_0(RTCC_OFF);
   setup_timer_1(T1_INTERNAL | T1_DIV_BY_1);
   setup_timer_2(T2_DISABLED,0,1);
   setup_timer_3(T3_DISABLED);
   setup_comparator(NC_NC_NC_NC);
   setup_vref(FALSE);
   port_b_pullups(FALSE);
   set_tris_b(0b00000111);
   set_tris_e(0b00010000);
   output_e(0x00);
   set_tris_c(0b10000000);

  while (TRUE);
 {
//lazo infinito
 }
 }