hoy estoy progamando el pic, más hay mucho erros!!
No consigo converter a/d!!
Puede me ajudar!!
hoy estoy progamando el pic, más hay mucho erros!!
No consigo converter a/d!!
Puede me ajudar!!
En ese código estás
1. leyendo el canal 2
2. El Vref es el pin AN3.
3. Haces un "return" cuando no hace falta! porque no has hecho ningún call. Si haces un return sin un call previo, y el stack está vacío, el Program Counter irá a la posición 0x000.
Saludos
MOVLW B'00000111'
MOVWF TRISA
MOVLW B'11111111'
MOVWF TRISB
MOVLW B'00000000'
MOVWF TRISC
MOVLW B'11011011'
MOVWF OPTION_REG
MOVLW B'00000000'
MOVWF INTCON ;NÃO HAVERÁ INTERRUPÇÃO
MOVLW B'00001101'
MOVWF ADCON1
qué hago para poder parar para aparecer este msg ?
One or more breakpoints could not be resolved.Select breakpoints from the debugger menu for details
Ellos ajundem.Yo no saber o que hacer para convertir.
Qué hacer?
Ajudem mi!!!
Gracias
Abrazo
¿Puedes subir tu código en un archivo .zip? Al escribir el nuevo mensaje ve a Opciones Adicionales y sube el archivo.
Perdona no me había entendido.
Gracias!!
ADC-W0008: No stimulus file attached to ADRESL for A/D.
ADC-W0001: Tad time is less than 1.60us
ADC-W0008: No stimulus file attached to ADRESL for A/D.
CORE-E0001: Stack over flow error occurred from instruction at 0x000017
CORE-E0001: Stack over flow error occurred from instruction at 0x00001b
CORE-E0001: Stack over flow error occurred from instruction at 0x000032
cómo decidir estos problemas?
1) Tenías algo mal, que usabas un CALL ACIONAMIENTO cuando debiera ser un GOTO ACIONAMIENTO.
si I darme es lento en el programa.
Será esa AYUDA?
sí!!!!continúo dando el error.
VOY A TENER ESO PARA HACER LA TABLA DE CONVERSIÓN DE UAM?
TENÍAN DICHO ESTE VIERNES MÁS A MÍ QUE ENCUENTRO QUE ES MUY COMPLICADA!
Do you think have that to make a conversion table?
they had given to this suggestion Saturday to me more I find very complicated!
what must make?
always appears this error.
ADC-W0001:Tad time is less than 1.60us
ADC-W0008: No stimulus file attached to ADRESL for A/D.
I also did not understand!
But they dizeram me that a conversion table was more practical. (ASCII) You know as to make?
It will be that it is because the LM35 liberates a tension very low.
Do you think i amplify it?
It will be that it is because the LM35 liberates a tension very low.
Do you think i amplify it?
my temperatures go of 2°C 150°C then my lesser tension will be 0,02V.
I go to send the data for the PC using the parallel door.
I know that it is more easy, but have that to use pic. Idea of my head
thanks!!! :-/
I think that it goes half to be complicated to only amplify, therefore the maximum qua the analog input allows is 5V not giving a great very satisfactory precision to me.
It would like amplifies 10 times!
It has as?
I think that it goes half to be complicated to only amplify, therefore the maximum qua the analog input allows is 5V not giving a great very satisfactory precision to me.
It would like amplifies 10 times!
Si usas un rango hasta 150V, eso te da 1.5V, que es 'mas o menos' aproximado y no tienes que amplificar tanto.
Podrías usar un Vref de 2 voltios para el A/D.
Since deep mine of scale pic is 2 would read small tensions?
this that if became my question.
I don't go to amplifies 10 times!! :D
puedo colocar el sensor directo en la entra analogica.
puedo usar um rango de 2,5?
de nuevo mi circuito
ya coloqué exactamente así! , pero no funciona.
Que hacer?
Gracias
exactamente con led no funciona.
gracias
estoy a usa um xt de 4MHz!!!!
gracias
Gracias!!!!!
VIVA FUNCIONA!
UHUHUHUHUHUHUHU!!!
MUCHA GRACIAS!!!
UHUHUUHUHUHUHUHUHUH!!!!!!
VIVA!!!!!!
:-/ :-/ :-/ :-/ :-/ :-/ :-/ :-/ :-/ :-/ :-/ :-/ :-/ :-/ :-/
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
MUCHAS MUCHAS GRACIAS!!
hola por favor ayudenme mi pic 16f876a no funciona para nada se supone que era un contador pero no funciona tengo el codigo en asm ya le descardue al pic mediante el programa ICprog lee coorrectam,ente los datos pero no funciona el circuito por favor ayudenme