Serial EEPROM Devices
---------------------
NOTE: Other supported voltage grades are listed in parentheses
next to the device. Select the "LC" part number to program
these other voltage grades.
11LC010 (AA)
11LC020 (AA)
11LC040 (AA)
11LC080 (AA)
11LC160 (AA)
24LC00 (AA)(C) 25LC010A (AA)
24LC01B (AA) 25LC020A (AA)
24LC02B (AA) 25LC040A (AA)
24LC04B (AA) 25LC080A (AA)
24LC08B (AA) 25LC080B (AA)
24LC16B (AA) 25LC160A (AA)
24LC32A (AA) 25LC160B (AA)
24LC64 (AA)(FC) 25LC320A (AA)
24LC128 (AA)(FC) 25LC640A (AA)
24LC256 (AA)(FC) 25LC128 (AA)
24LC512 (AA)(FC) 25LC256 (AA)
24LC1025 (AA)(FC) 25LC512 (AA)
25LC1024 (AA)
93LC46A/B/C (AA)(-C)
93LC56A/B/C (AA)(-C)
93LC66A/B/C (AA)(-C)
93LC76A/B/C (AA)(-C)
93LC86A/B/C (AA)(-C)
Connections for 11LC devices
---------------------------------------
PICkit 2 Pin 11LC Device Pin (DIP)
(2) Vdd ! 8 Vcc
(3) GND 4 Vss
(6) AUX 5 SCIO
! 11LC devices may not program properly below 3.6V VDD.
This is a limitation of the PICkit 2 AUX IO pin.
Connections for 24LC devices
---------------------------------------
PICkit 2 Pin 24LC Device Pin (DIP)
(2) Vdd ! 8 Vcc
(3) GND 4 Vss
(5) PGC 6 SCL (driven as push-pull)
(6) AUX 5 SDA (requires pullup)
7 WP - disabled (GND)
1, 2, 3 Ax pins
Connect to Vdd or GND per
datasheet and to set address
! 24LC devices may not program properly below 3.6V VDD.
This is a limitation of the PICkit 2 AUX IO pin.
Connections for 25LC devices
---------------------------------------
PICkit 2 Pin 25LC Device Pin (DIP)
(1) VPP 1 nCS
(2) Vdd 8 Vcc
(3) GND 4 Vss
(4) PGD 2 SO
(5) PGC 6 SCK
(6) AUX 5 SI
7 nHOLD - disabled (Vdd)
3 nWP - disabled (Vdd)
Connections for 93LC devices
---------------------------------------
PICkit 2 Pin 93LC Device Pin (DIP)
(1) VPP 1 CS
(2) Vdd 8 Vcc
(3) GND 5 Vss
(4) PGD 4 DO
(5) PGC 2 CLK
(6) AUX 3 DI
7 PE - enabled (Vdd)
6 'C' Device ORG
Set to select word size