TODOPIC
Microcontroladores PIC => Pic32 => Mensaje iniciado por: JamesTaggart en 16 de Julio de 2017, 19:47:11
-
PIC32MK0512MCF100
120Mhz MIPS32 microAptiv MCU Core
Floating Point Unit for single and double precision math
MicroMIPS Mode for 40% smaller code size
DSP-Enhanced Core:
Four 64-bit Accumulators
Single Cycle MAC supporting saturating and fractional math
(http://www.microchip.com/images/default-source/design-centers/32bit/pic32mk.jpg)
Features
120Mhz MIPS32 microAptiv MCU Core
Floating Point Unit for single and double precision math
MicroMIPS Mode for 40% smaller code size
DSP-Enhanced Core:
Four 64-bit Accumulators
Single Cycle MAC supporting saturating and fractional math
512KB Dual Panel Flash with Live Update support
4KB EEPROM
High Performance Analog Front End
7x 12-bit 3.75MSPS ADC Cores up to 42 analog inputs
Four Op amps
Five analog comparators
Up to three 12-bit DACs
Motor Control PWM
Eight PWM pairs
Six additional Single-Ended PWM modules
Dead Time for rising and falling edges
Dead-Time Compensation
8 ns PWM Resolution
Clock Chopping for High-Frequency Operation
PWM Support for:
DC/DC, AC/DC, inverters, PFC, lighting
BLDC, PMSM, ACIM, SRM motors
Choice of six Fault and Current Limit Inputs
Flexible Trigger Configuration for ADC Triggering
Output Compare / Input Captures / RTCC
Up to 6 Quadrature Encoder Interface (QEI) Modules
16 Output Compare
16 Input Capture
RTCC
Extensive Communication Interfaces
Two FS USB 2.0 OTG controllers
FourCAN2.0 Modules
Up to six UART Modules (up to 25Mbps) with LIN and IrDA support
Up to six SPI/I2S modules
Peripheral Pin Select (PPS) to enable remapable pin functions
Qualification and Class B Support
AEC-Q100 REVG (Grade 1 -40ºC to +125ºC) (planned)
Class B Safety Library, IEC 60730 (planned)
Back-up internal oscillator
Programmable High/Low-Voltage Detect module
Clock monitor with Back-up Internal Oscillator
Global register locking
Debugger Development Support
In-circuit and in-application programming
2-wire or 4-wire MIPS® Enhanced JTAG interface
Unlimited software and 12 complex breakpoints
IEEE 1149.2-compatible (JTAG) boundary scan
Non-intrusive hardware-based instruction trace