por favor alguien puede indicarme como se inserta correctamente este codigo en la plantilla del mplab ide
**********************************************************************
; This file is a basic code template for object module code *
; generation on the PICmicro PIC16F873A. This file contains the *
; basic code building blocks to build upon. As a project minimum *
; the 16F873A.lkr file will also be required for this file to *
; correctly build. The .lkr files are located in the MPLAB *
; directory. *
; *
; If interrupts are not used all code presented between the *
; code section "INT_VECTOR and code section "MAIN" can be removed. *
; In addition the variable assignments for 'w_temp' and *
; 'status_temp' can be removed. *
; *
; If interrupts are used, as in this template file, the 16F873A.lkr *
; file will need to be modified as follows: Remove the lines *
; CODEPAGE NAME=vectors START=0x0 END=0x4 PROTECTED *
; and *
; SECTION NAME=STARTUP ROM=vectors *
; and change the start address of the page0 section from 0x5 to 0x0 * *
; *
; Refer to the MPASM User's Guide for additional information on *
; features of the assembler and linker (Document DS33014). *
; *
; Refer to the respective PICmicro data sheet for additional *
; information on the instruction set. *
; *
;**********************************************************************
; *
; Filename: xxx.asm *
; Date: *
; File Version: *
; *
; Author: *
; Company: *
; *
; *
;**********************************************************************
; *
; Files required: *
; *
; *
; *
;**********************************************************************
; *
; Notes: *
; *
; *
; *
; *
;**********************************************************************
list p=16f873a ; list directive to define processor
#include <p16f873a.inc> ; processor specific variable definitions
__CONFIG _CP_OFF & _WDT_OFF & _BODEN_OFF & _PWRTE_ON & _RC_OSC & _WRT_OFF & _LVP_ON & _CPD_OFF
; '__CONFIG' directive is used to embed configuration data within .asm file.
; The labels following the directive are located in the respective .inc file.
; See respective data sheet for additional information on configuration word.
;***** VARIABLE DEFINITIONS (examples)
; example of using Shared Uninitialized Data Section
INT_VAR UDATA_SHR 0x71
pclath_temp RES 1 ; variable used for context saving
; creating copies of interupt context saving variables in bank1
INT_VAR1 UDATA_SHR 0xF1
; example of using Uninitialized Data Section
TEMP_VAR UDATA_SHR 0x20 ; explicit address specified is not required
temp_count RES 1 ; temporary variable (example)
;**********************************************************************
RESET_VECTOR CODE 0x000 ; processor reset vector
nop ; nop required for icd
movlw high start ; load upper byte of 'start' label
movwf PCLATH ; initialize PCLATH
goto start ; go to beginning of program
MAIN bsf STATUS,RP0
bcf STATUS,RP1
clrf TRISB
movlw b'00000110'
movwf ADCON1
movlw b'00000110'
movwf TRISA
bcf STATUS,RP0
clrf PORTB
clrf PORTA
BUCLE movf PORTA,W
btfss STATUS,Z
goto APAGAR
goto ENCENDER
ENCENDER movlw 0xFF
movwf PORTB
goto BUCLE
APAGAR clrf PORTB
goto BUCLE
start
nop ; code starts here (example)
; remaining code goes here
END ; directive 'end of program'
